D1 - 2017 duralumin sheet, strip, pipe
Supplier — AvekGlob company — offers at reasonable prices from the manufacturer a sheet, tape, pipe, which are made of durability grade D1 (AA2017). The supplier guarantees the timely delivery of products to any address specified by the consumer.
Dural of D1 brand (the closest foreign analogues produced according to US standards are the alloys AA2017 and A92017) is an aluminum-copper alloy, additionally alloyed with iron, zinc and titanium. The alloy is characterized by low cost, low density, well suited to plastic deformation operations. Dural D1 (AA2017, A92017) is non-magnetic, does not spark during use, has good electrical and thermal conductivity, and chemical / corrosion resistance in the air atmosphere, which can be further increased by anodizing. Anodizing also produces additional decorative finishing of products from this alloy, as a result of which it is poured into the light in various color shades.
Urgency of application
Duralumin deformable alloy D1 (AA2017 and A92017) is used in construction, marine and aircraft industries because of its ease of manufacture, non-toxicity, mechanical strength and resistance to aggressive media found in industry (including chlorine-containing liquids and salts, for example, seawater).
Sheet rolling from duralumin D1 (AA2017 and A92017) is widely used in the automotive and aerospace industry, where it is used to manufacture hull elements and cladding of various designs of complex spatial shapes and sizes. Chemical composition
According to the technical requirements of GOST 4784−97, D1 consists of the following elements (numerical data — in percent, aluminum basis):
|up to 0.7||0.2 — 0.8||0.4 — 1||up to 0.1||up to 0.15||3.5 — 4.5||0.4 — 0.8||up to 0.25||other, each 0.05; only 0.15||Ti + Zr <0.2|
Physical and mechanical properties
- density, kg / m 3 — 2800;
- melting point, 0 С — 645… 650;
- coefficient of thermal expansion in the temperature range 20… 100 0 С, μm / deg — 22,9;
- Specific heat capacity, J / kggrad — 922;
- Modulus of elasticity, GPa — 72;
- coefficient of thermal conductivity in the temperature range 20… 100 0 С, W / mgrad — 130;
- hardness in Brinell, HB — 45… 95 (respectively, for soft and hard dural);
- the limit of the temporary resistance, MPa — 195… 375 (respectively, for soft and hard dural);
- yield strength, MPa — 110… 275 375 (respectively for soft and hard dural);
- permissible tensile elongation,% — 12… 5 (respectively, for soft and hard dural).
Assortment and application features
A sheet, a tape, a pipe from a duralumin Д1 (АА2017 and А92017) are made in a wide range of cross-sections and length. The initial duralumin preforms after primary plastic deformation — rolling, stamping, extruding — are advisable to age. Aging can be natural (for several days) or artificial (several hours). This treatment optimizes the mechanical properties of the alloy.
Supplier — AvekGlob Company — offers to purchase sheet, ribbon, D1 pipe (AA2017 and A92017) in the required assortment of cross sections and length. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.