• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

01Х25М2Т - aisi 301 sheet, round, wire

01Х25М2Т - aisi 301 sheet, round, wire

General characteristics

Alloy 01Х25М2Т-VI refers to the chromium ferritic steel. Smelted in vacuum induction furnaces. Possible vacuum decarburization in the ladle. Production normalized following specifications: 14−1-3996−85; 14−1-3547−83; 14−3-1275−83. All manufactured products meet the requirements of the state standard to assure the best quality.

The chemical composition of the alloy 01Х25М2Т-VI.

Cu Cr C Fe Ni Mo Mn N P Si S Ti
≤0,15 from 24 to 26 ≤0,01 DOS. ≤0,4 from 1.8 to 2.5 ≤0,7 ≤0,01 ≤0,015 ≤0,5 ≤0,015 from 0.25 to 0.45

Hardening

If high requirements for structures used, heating of semi-finished products up to 1000 — 1100ºС with further cooling in water or air. This heat treatment promotes the normalization of internal stresses in the alloy and increasing the strength characteristics of parts.

Welding

Due to the balanced chemical composition of welding possible without the use of sophisticated equipment and without a final heat treatment after welding. Welding is done in manual and automatic mode. For manual electric arc welding used electrodes OzL-24 using the wire brand 02Х17Н14С4. For TIG automatic and manual arc welding recommended the use of filler wire 02Х8Н22С6.

Use

Used in chemical, petrochemical and pulp and paper industries for welding equipment operating in aggressive environments organochlorine products, caustic soda, hydrochloric-, phosphoric-, and sulfuric acid solutions at temperatures up to + 300 °C and pressure of not more than 5 N/mm2. This alloy is produced equipment necessary for the synthesis of ion-exchange resins, polypropylene, pharmaceuticals, etc. products. Frequent customers of this alloy become today, the Institute of physical and chemical laboratory. Alloy tubes 01Х25М2Т-VI are needed in many chemical structures, for example, engaged in the distillation of alkalis and acids. Sheets and tape are very popular in engineering and instrument making. Metals alloyed with chromium, have more endurance, heat resistance, and mechanical strength.

Buy at best price

The company «AVEK global» implements of metal heat-resistant alloys at an affordable price from the manufacturer. We have the most variety of products for large-scale production. We offer favorable conditions for wholesale and retail customers. On our website You will find the necessary information. Our consultants are always ready to answer your questions. The price depends on order volume and additional conditions of delivery. Implementation of orders in the shortest possible time. Wholesale customers enjoy significant discounts.