Sheet, rod, round grade 1 titanium 3.7025 - CP4
Buy at affordable prices from the manufacturer sheet, bar or circle, which are made of titanium grade CP4 Grade 1 (another name — 3.7025), offers the company AvekGlob. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Composition and application
According to the North American classification of AMS-T-9046, AMS 4940, Classes 1−4 are unalloyed, and are commonly known as CP (commercially pure titanium). The tensile strength and tensile yield strength of titanium usually increase with the class number.
Titanium brand CP4 Grade 1 is intended for primary plastic shaping in forgings or finished products. Usually it comes in an annealing state. 3.7025 is the numerical designation DIN EN for this material. R50250 is the UNS standard number.
Among the deformable grades of titanium and low-alloy titanium alloys, titanium grade CP4 Grade 1 is characterized by a rather high plasticity. At the same time, it has a fairly low tensile strength and moderately high impact strength. The material is well welded, which allows it to be used for the manufacture of complex structures.
Due to its high plasticity, titanium CP4 Grade 1 (3.7025) is easily stamped in the cold state and is therefore used mainly for plate, frame and tube heat exchangers, plates for explosive bonding of clad products, etc. Due to good fluidity characteristics, the material in question is sometimes used in form of castings for subsequent use in dental purposes.
The chemical composition of the metal is given in the table:
|Alloying element / admixture||Ti||C||Fe||N (bound)||O (related)||H (bound)|
|Content in%||the basis||Not more than 0.08||Not more than 0.02||Not more than 0.03||Not more than 0.15||Not more than 0.015|
The Avecglob company offers to purchase at different prices from the manufacturer different rolling profiles — sheet, rod, circle, which are made of titanium grade CP4 Grade 1. The supplier ensures the prompt delivery of the ordered products to any point set by the customer.
Basic physical characteristics of metal:
Density, kg / m 3 — 4500;
Melting point, 0 С — 1610… 1650;
Coefficient of thermal conductivity, W / megade — 20;
Specific heat capacity, J / kggrad — 540;
Modulus of elasticity, GPa — 110.
Basic mechanical characteristics of metal:
The limit of time resistance, MPa — 310;
Yield strength, MPa — 220;
Relative elongation at tension,% — 28;
Relative reduction of cross-sectional area,% — 36;
Hardness in Brinell, HB, not more than 120.
AvekGlob Company sells sheet, rod and wheel made of titanium brand CP4 Grade 1 (3.7025) at reasonable prices from the manufacturer. The supplier provides a guaranteed delivery of rolled metal to any point agreed by the customer.