Wire, circle, Inconel 601® rod - 2.4851 - alloy 601
AvekGlob Company sells volume rolling (circle, bar, wire) made of Inconel 601® (2.4851) alloy at affordable prices from manufacturers. the supplier is guaranteed timely delivery of products to any address specified by the consumer.
Composition and application
The Inconel 601® alloy (2.4851) belongs to the group of iron-nickel-chromium alloys, with additional aluminum alloying. Therefore, while maintaining high corrosion resistance at elevated temperatures and in corrosive environments, the alloy also retains a high mechanical strength. Inconel 601 is used in structural elements of industrial furnaces, thermocouple pipes, heat treatment equipment, baskets of carrying conveyors, in petrochemical equipment and in aircraft components.
The Inconel 601® alloy (2.4851) does not react to heat treatment, is characterized by good workability at normal and high temperatures. Inconel 601 demonstrates a high resistance to water corrosion, but is not recommended for use in environments that contain an increased percentage of sulfur, as it increases its fragility.
The chemical composition of the alloy, which meets the technical requirements of the standard UNS No. 06601, is presented in the table:
|Copper||Not more than 1.0|
|Manganese||Not more than 1.0|
|Carbon||Not more than 0.10|
|Silicon||Not more than 0.5|
|Sulfur||Not more than 0.015|
Note. The composition of the alloy allows up to 0.006% boron.
AvekGlob company offers to buy at affordable prices from the manufacturer a circle, bar or wire made of corrosion resistant alloy of Inconel 601® (2.4851). The supplier provides a guaranteed shipment of products to any point set by the customer.
Basic physical characteristics of the alloy:
Density, kg / m 3 — 8110;
Melting point, 0С — 1360… 1410;
Coefficient of thermal expansion in the temperature range of 20… 100 0 С, μm / deg — 13.75;
Modulus of elasticity, GPa — 207;
Coefficient of thermal conductivity, W / megade — 11.2.
Basic mechanical characteristics of the alloy:
The limit of temporary resistance, MPa — 600… 650;
Yield strength, MPa — 240… 300;
The coefficient of relative elongation at tension. % — thirty;
Hardness according to Brinell, HB, not more — 220.
Recommended limit temperatures for the use of products from this alloy in air environments are up to 1200 0 С.
Buy at an affordable price from the manufacturer of wire, a circle or bar from the alloy Inconel 601® (2.4851) offers the company AvekGlob. The supplier immediately delivers the products to any point agreed by the customer.