• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

LAZH60-1-1 rod, tape, wire

LAZH60-1-1 rod, tape, wire

Supplier — AvekGlob company — offers at reasonable prices from the manufacturer a wire, a tape, a rod made of brass LAZH60−1-1 The supplier guarantees timely delivery of products to any address specified by the consumer /

Technical specifications

Brass grades ЛАЖ60−1-1 refers to complex alloyed deformable copper-zinc alloys. It is characterized by high strength characteristics and high enough corrosion resistance, including, at elevated temperatures up to 150… 200 0 С. It is well amenable to heat treatment for changing its operational parameters (strength, toughness, etc.). It can be used in the tooling for electroerosion machining processes.

Urgency of application

Typical applications of the material are electrical parts, fasteners. working in slightly corrosive environments, large gear units, pickling tanks, soft-shell guides for hot grinding mills, high strength clamps, hydrant parts, welding sponges, etching equipment, worm gears, valve pump housings, wear plates, thrust pads, valve seat bearings and sanitary fittings, bushings, gears, pistons.

In marine affairs, brass LAZH60−1-1 is used for the manufacture of propellers and other parts of small sea-going vessels, in the arms business — in the manufacture of small arms.

Chemical composition

It is shown in the table (numeric data — in percent). Standards meet the technical requirements of GOST 15527−2004:

Fe Mn P Al Cu Pb Zn Sb Bi Impurities
0.75 — 1.5 0.1 — 0.6 up to 0.01 0.7 — 1.5 58 — 61 up to 0.4 rest up to 0.005 up to 0.002 only 0.7

Physical and mechanical properties

  • density, kg / m 3 — 8300;
  • melting point, 0 С — 904;
  • coefficient of thermal expansion in the temperature range of 20… 100 0 С, μm / deg — 21,6;
  • coefficient of thermal conductivity at room temperature, W / mgrad — 75.4;
  • Brinell hardness, HB — 50… 170 (lower values for soft and pressed brass);
  • limit of temporary resistance, MPa — 400… 750 (lower values for soft and pressed brass);
  • yield strength, MPa — 110… 130;
  • modulus of elasticity, GPa — 105;
  • permissible tensile elongation,% — 55… 8 (respectively, for soft and hard brass).

Assortment and application features

The brass bar, circle and wire from the material under consideration are produced in a wide range of sizes and profiles. The range of brass LAZH 60−1-1 is determined by GOST 10666−90 and GOST 2060−2007.

Mechanical machinability of brass material — medium, it is not recommended to use high-speed feeder cutting tools. The temperature range of forging is 650… 800 0 С.

Supplier — AvekGlob Company — offers to purchase bars, ribbons or wires that are made of brass of the brand LAZH60−1-1, in a wide assortment of sizes and cross-section profiles. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.