• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Sheet, strip 5ХГМ - 40CrMnMo7 - 1.2311 - aisi P20

Sheet, strip 5ХГМ - 40CrMnMo7 - 1.2311 - aisi P20

Technical specifications

Steel tool stamping. Not applicable for welded structures, sensitive to flock formation, prone to temper brittleness: Hardness after annealing HB 10 -1 = 241 MPa. The temperature of the critical points of the material. Ac 1 = 700, Ac 3 (Acm) = 800, Ar 3 (Arc m) = 700, Mn = 220.

Heat treatment

Tempering 850 ° C, oil, Holiday 450 ° C, 2 hours.

Properties of long products (temperature 20 ° C)

  1. sв — Short-term strength limit: 1570 MPa
  2. sT — Proportionality limit (yield strength for permanent deformation): 1450 MPa
  3. d5 — Elongation at break: 9%
  4. y — Relative narrowing: 26%
  5. KCU — Impact strength: 360 kJ / m2

Using

Hammer stamps of steam-air and pneumatic hammers with a mass of falling parts up to 3 tons, forging stamps for hot stamping, rolls of large, medium and small-section steel rolling mills.

Percent composition, GOST 5950−73

Fe C Si Mn Ni S P Cr Mo Cu
basis 0.5 — 0.6 0.25 — 0.6 1.2 — 1.6 ≤0.35 ≤0.03 ≤0.03 0.6 — 0.9 0.15 — 0.3 ≤0.3

Foreign analogues

Germany (DIN, WNr): 40CrMnMo7, 55NiCrMoV6, 57NiCrMoV7−7, X38CrMoV5−1.

Buy

Supplier Avgloft offers a sheet, 5HGM grade strip, 40CrMnMo7, 1.2311, aisi P20 at a bargain price. The supplier guarantees the timely delivery of products to any specified address. Regular customers can take advantage of discount discounts. The price is the best in this segment of rental.

Delivery, price

Buy sheet, brand 5HGM, 40CrMnMo7, 1.2311, aisi P20 at an affordable price from the supplier Avlob today. The price is formed on the basis of European production standards. The supplier Avlob offers to buy a sheet, a strip of mark 5ХГМ, 1.2311, aisi P20 at the optimal price in bulk or at retail.