• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Alloy of tantalum Tav-10

Alloy of tantalum Tav-10

Supplier — AvecGlob Company — offers tantalum alloy TAV-10 at reasonable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer /

Technical specifications

Tantalum alloy TAV-10 is an alloy of tantalum with tungsten, which is used in nuclear technology. It is produced by electron-beam melting technology.

Urgency of application

The main areas of application of the TAV-10 alloy are electronics, medicine, nuclear technology and energy. In the electronics industry, this alloy is used to produce a capacitor wire, which is due to the ability of tantalum and tungsten to withstand high operating temperatures. This allows components to be small in size, but very sensitive to space in telecommunications, data storage and implantable medical devices.

The TAV-10 alloy is also used for electronic sound filters and as a barrier against the diffusion of copper in semiconductors, for the manufacture of components for chemical plants, nuclear power plants, aircraft and missiles, for the manufacture of surgical equipment and implants.

Chemical composition

Tantalum alloy TAB-10 contains tantalum (up to 89%), tungsten (about 10%) and impurities, mainly carbon, niobium and gases — bound nitrogen and oxygen.

Physical and mechanical properties

  • Density, kg / m 3 — 16900;
  • Melting point, 0 С — 3030;
  • Specific heat capacity, J / kggrad — 170;
  • Modulus of elasticity, GPa — 205… 207;
  • The limit of temporary resistance, MPa — 550… 620;
  • Limit of plasticity, MPa — 345… 360;
  • Relative elongation at tension,% — 30;
  • Hardness according to Vickers, HV, not more than 245.

Assortment and application features

Due to its sufficient plasticity, the TAB-10 alloy is supplied in a range of sheets with a thickness of 0.1… 10 mm, with a width of up to 1000 mm (length — according to the customer’s request), rod and a circle with a diameter of 3… 110 mm, and pipes 0.5… 30 mm with a wall thickness of 0.2… 5.0 mm. The alloy is amenable to plastic deformation in the cold state, high-temperature annealing is used to increase the ductility of the material.

Supplier — AvekGlob Company — offers to buy tantalum alloy of TAV-10 brand in a different assortment. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.