• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Sheet, rod, circle grade 4 titanium 3.7065 - CP1

Sheet, rod, circle grade 4 titanium 3.7065 - CP1

Would you like to buy a sheet, rod, circle of titanium CP1 Grade 4 (3.7065) from the supplier — the company AvecGlob? Here you will find the necessary information on this topic

Avec Glob Company sells sheet, bar and wheel made from titanium of CP1 Grade 4 brand (at an affordable price — 3.7065 alloy) at reasonable prices from the manufacturer. the supplier is guaranteed timely delivery of products to any address specified by the consumer.

Composition and application

Titanium grade 4, also known as titanium CP1, is the softest and most plastic of all titanium grades. It has excellent corrosion resistance and high impact strength. The material is used as initial blanks for subsequent plastic deformation operations. Usually it is provided in the annealing state. 3.7065 is a digital marking according to the European standard DIN EN for this material, R50700 is the UNS standard number.

The strength of this alloy is higher than titanium classes 2 and 3, but it is characterized by a high content of impurities. It is used in the aerospace industry, in medicine and chemical / food machinery for the production of parts or forgings, which must have increased strength. Due to the lower value of the coefficient of thermal expansion, titanium CP1 Grade 4 (3.7065) is used at elevated operating temperatures, since while maintaining high corrosion resistance, the parts simultaneously have an increased durability. The material is not magnetic.

Due to its excellent resistance to corrosion fatigue in seawater, the alloy in question is commonly used for marine components. Titanium CP1 Grade 4 (3.7065) is resistant to many chemical environments, including oxidizing media, alkaline media, organic compounds and acids, aqueous saline solutions and wet or dry hot gases. It also has sufficient corrosion resistance in liquid metals, nitric acid, slightly reducing acids and wet chlorine or bromine gas. This alloy is not subject to embrittlement of grain boundaries or sensitization at elevated temperatures.

The chemical composition of titanium CP1 Grade 4 is shown in the table:

content,% C N O H Fe TI
Least 0 0 0 0 0 the basis
The largest 0.08 0.05 0.40 0.015 0.5 the basis

Buy a cost-effective sheet, rod and a circle of titanium CP1 Grade 4 (3.7065) offers the company AvekGlob. The supplier provides prompt delivery of the rolled products to any point set by the customer.

Properties

Basic physical characteristics of the material:

Density, kg / m 3 — 4500;

Melting point, 0 С — 1640… 1660;

Coefficient of thermal expansion, μm / deg — 9,4;

Coefficient of thermal conductivity, W / mdg — 19;

Specific heat capacity, J / kggrad — 540;

Modulus of elasticity, GPa — 110.

Basic mechanical characteristics of the material:

  • The limit of time resistance, MPa — 640;
  • Yield strength, MPa — 380;
  • Relative elongation at tension,% — 17;
  • Relative reduction of cross-sectional area,% — 28;
  • Hardness in Brinell, HB, no more than 200.

Titanium CP1 Grade 4 (3.7065) is characterized by good casting qualities and weldability.

Company Avecglob proposes to purchase at affordable prices from manufacturers a sheet, rod or circle, which are made of titanium grade CP1 Grade 4 (3.7065). The supplier immediately delivers the rolled products to any point agreed by the customer.