• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Wire, circle, Inconel rod 718® - 2.4668 - alloy 718

Wire, circle, Inconel rod 718® - 2.4668 - alloy 718

Company Avecglobal sells wire, bar and rods, which are produced from nickel alloy of Inconel 718® brand (other names — Alloy 718, 2.4668) at reasonable prices from manufacturers. The supplier guarantees the operative delivery of rolled metal to any address specified by the customer.

Composition and application

Inconel 718® alloy (Alloy 718, 2.4668) belongs to the group of heat-quenched iron-nickel alloys that retain their performance properties up to 700 0 C. The characteristics of the alloy are good strength and minimal creep at high temperatures. The alloy is also characterized by high strength properties at cryogenic temperatures, and also works well under dynamic loads. Inconel 718® (Alloy 718, 2.4668) is used for the production of components of gas turbines, rocket engines,

aerospace engineering, nuclear reactors, highly responsible pumping units, fasteners, cryogenic tanks, working parts of oil and gas production equipment.

The chemical composition of the Inconel 718® alloy (Alloy 718, 2.4668) conforming to ASTM B637 and UNS N07718 standards is given in the table:

Ni,

%

Cr,

%

Mo,

%

Nb,

%

Fe,

%

Al,

%

Ti,

%

C,

%

Mn,

%

Si,

%

Cu,

%

S,

%

P,

%

Co,

%

50… 55 17… 21 2.8… 3.3 4.75… 5.5 The basis 0.2… 0.8 0.7… 0.15 Not more than 0.08 Not more than 0.35 Not more than 0.35 Not more than 0.3 Not more than 0.01 Not more than 0.015 Not more than 1.0

Buy at economically advantageous prices wire, circle, rod, made of iron-nickel alloy brand Inconel 718® (Alloy 718, 2.4668), offers the company AvekGlob. The supplier provides prompt delivery of products to any point. installed by the client.

Properties

Basic physical characteristics of the alloy:

Density, kg / m 3 — 8200;

Melting point, 0 С — 1260… 1340;

The coefficient of thermal expansion in the temperature range 20… 100 0 С, μm / deg — 13,1;

Modulus of elasticity, GPa — 204.9;

Coefficient of thermal conductivity at room temperature, W / megade — 13.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 1230;

Yield strength, MPa — 1030;

Relative elongation at tension,% — 12;

Hardness in Brinell, HB, not more than — 363.

Company Avecglob proposes to purchase at affordable prices from the manufacturer various volumetric metal — a circle, wire, rod — from iron-nickel alloy of the brand Inconel 718® (Alloy 718, 2.4668). The supplier makes immediate shipment of products to any point agreed by the customer.