• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Sheet, rod, circle, OT4-1

Sheet, rod, circle, OT4-1

Do you want to buy a sheet, rod, a circle of titanium alloy OT4−1 from the supplier — the company AvecGlob? Here you will find the necessary information on this alloy

Company Avecglobal sells at affordable prices from the manufacturer a sheet, rod and circle, which are made of low-alloy titanium alloy OT4−1. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Titanium-aluminum-magnesium alloy OT4−1 refers to pseudo-titanium alloys. It has a small mechanical strength and increased plasticity. The alloy is used for the manufacture of products, which in the course of their work is not subject to significant operating loads.

The fine-grained microstructure of the alloy, which does not change during plastic deformation, contributes to the uniformity of the properties of the resulting articles, which is the reason for the wide use of this alloy in such industries as aerospace, energy and industrial (in particular, chemical) production. OT4−1 alloy is distinguished by its high corrosion resistance, and is therefore also used in the medical industry.

The presence of magnesium makes the alloy easy to machine (including, and casting). When permanently used in corrosive environments, the surface of parts that are made of the alloy under consideration is desirable to be anodized. The recommended temperature for the use of products made of the alloy Ot4−1, should not exceed 300… 350 0 С.

The chemical alloy of the alloy, which meets the technical requirements of GOST 19807−91, is given in the table (numerical data — in percent, titanium — base):

Fe C Si Mn N Al Zr O (related) H (bound) Impurities
Not more than 0.3 Not more than 0.1 Not more than 0.12 0.7 — 2 Not more than 0.05 1.5 — 2.5 Not more than 0.3 Not more than 0.15 Not more than 0.012 Do0.3

Buy a cost-effective price from the manufacturer of a sheet, rod or circle, made of titanium alloy OT4−1, offers the company AvekGlob. The supplier performs an operational shipment of rolled products to any point set by the customer.

Properties

Basic physical properties of the alloy:

Density, kg / m 3 — 4545;

Melting point, 0 С — 1660;

Coefficient of thermal expansion in the temperature range 20… 400 0 С, μm / deg — 9,6;

The coefficient of thermal conductivity in the temperature range 20… 400 0 С, W / md — 14,24;

Specific heat capacity in the temperature range 20… 400 0 С, J / kggrad — 0.67;

Modulus of elasticity, MPa — 1,1.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 540… 600;

Yield strength, MPa — 160… 190;

Relative elongation at a stretching,% — 20… 25;

Relative narrowing of the cross-sectional area,% — 25… 35;

Hardness according to Brinell, HB, not more than 255.

Technological features of the alloy: weldability — good; because of the presence of bound hydrogen, the alloy is brittle, and therefore, before cold plastic deformation, the rolling should be annealed.

Company Avecglob proposes to purchase at affordable prices from the manufacturer a sheet, rod and a circle, obtained from titanium alloy OT4−1. The Supplier organizes an immediate delivery of the rental at any point agreed by the customer.