Aluminum processing, rolling and deformation

Are you interested in processing, rolling and deforming aluminum? Supplier Avlob offers to buy aluminum at a bargain price. The supplier guarantees the timely delivery of products to any address in Europe or abroad. Regular customers receive a discount discount. The price is the best in this segment.

Deformation

Depending on the composition and mechanical characteristics used:

• Rolling in cold or hot condition. Cold rolling is used to produce profiles of high plasticity alloy, for example, AD00 or AMg1. Hot rolled sections are obtained from aluminum grades AK1… AK7, as well as duralumin;
• Multiple or single drawing using drawing mills: this kind of treatment is used to produce aluminum wire;
• Casting, which receives castings from aluminum alloys with increased fluidity, but low plasticity (AL alloys);
• Pressing / extrusion — the technology is used to produce pipes, as well as round bars of cross-section (bars of other sections are produced primarily by rolling).

Forging and stamping of aluminum and its alloys

For hot stamping, rolled billets are used from alloys having the following mechanical characteristics:

• Ultimate tensile strength, MPa — 300… 380;
• The coefficient of relative elongation,% — 13… 5.

Forging aluminum alloys is conducted at temperatures of 400… 450 ° C. If cast aluminum billets are subject to treatment, which are characterized by a more coarse-grained structure, multiple forging with reduced crimping is used to exclude the possibility of cracking. Cold forging is subject to high purity aluminum — annealed, semi-hardened and cold-worked. Supplier Avlob offers to buy aluminum rolled products at a bargain price. The price is the best in this segment of rental.

Mechanical properties (temperature 20 ° C)

1. Sv — Short-term strength limit
2. St — Limit of proportionality (yield strength)
3. d5 — Elongation at break.
4. HB — Brinell hardness

Accordingly, with the aluminum of the first two groups, it is possible to perform both shaping and separation operations. The limiting degree of deformation is 85… 90%. Hardened aluminum alloys (in particular, duralumin D16 and D16T) in the initial state can be stamped only by cutting, punching, and also by simple molding and flexible

Delivery, price

Are you interested in processing, rolling and deforming aluminum? Buy aluminum at an affordable price from the supplier Avlob today. The price is formed on the basis of European production standards. Supplier Avlob offers to buy any color alloys at the optimal price in bulk or at retail.