• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Zinc anode

Zinc anode

Supplier — AvekGlob company — offers zinc anodes in a wide range of lengths and diameters at an affordable price from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Technical specifications

Zinc anodes are made from industrial grade zinc (the metal content is not less than 97.5%). They are brittle round profiles of blue-steel color. Extraction of zinc for subsequent rolling or drawing is achieved by heating the zinc oxide with carbon and then distilling the semi-finished product. In air, zinc anodes react with acids and alkalis.

Urgency of application

Zinc anodes are used for the following applications: for the protection of ships (ships, barges and tankers) against corrosion, for the implementation of cathodic protection of ships, vehicles or containers, for cleaning docks and harbors, for use in heat exchangers and condensing equipment, for the protection of underground objects (tanks, containers).

Chemical composition

The composition of zinc anodes is regulated by the requirements of GOST 3640−94 (numerical data — in percent):

Identification
the
marks
Zinc,
not less than
Impurity, not more than
Pb Cd Fe Cu Sn As Al Total
TSV00
CV0
CI
C0A
C0
C 1
Ts2
C3
99.997
99.995
99.99
99.98
99,975
99.95
98.7
97.5
0,00001
0.003
0.005
0.01
0.013
0.02
1.0
2.0
0.002
0.002
0.002
0.003
0.004
0.01
0.2
0.2
0,00001
0.002
0.003
0.003
0.005
0.01
0.05
0.1
0,00001
0,001
0,001
0,001
0,001
0.002
0.005
0.05
0,00001
0,001
0,001
0,001
0,001
0,001
0.002
0.005
0.0005
0.0005
0.0005
0.0005
0.0005
0.0005
0.01
0.01
0,00001
0.005
0.005
0.005
0.005
0.005
0.010
-
0.003
0.005
0.01
0.02
0.025
0.05
1.3
2.5
Notes. In zinc, used for rolled products, the mass fraction of aluminum should not be more than 0.005%.

In zinc of grade TSV00, the mass proportions of bismuth, nickel and antimony should not exceed 0.00001% of each.

In zinc of grades Ц2 and ЦЗ the mass share of antimony should be no more than 0,02%.

The admissible levels of impurity content can be changed by agreement between the manufacturer and the consumer without changing the content of the main substance and stipulated by the conditions for the supply of products.

The mass fraction of zinc is determined by the difference of 100% and the sum of the content of impurities of lead, iron, cadmium, copper and tin in percentage.

Physical and mechanical properties

  • density, kg / m 3 — 7100;
  • melting point, 0 С — 420;
  • coefficient of thermal expansion in the temperature range 20… 100 0 С, μm / deg — 31,2;
  • modulus of elasticity, GPa — 96.5;
  • coefficient of thermal conductivity in the temperature range 20… 100 0 С, W / mgrad — 112,2;
  • hardness according to Vickers, НV — 30;
  • yield strength, MPa — 37.

Assortment and application features

For domestic products, GOST 1180−91 is regulated. Zinc anodes are produced in thickness from 5 to 20 mm, width from 65 to 600 mm, height from 400 to 1200 mm. A special configuration of zinc anodes is also possible — rod, circle, disks.

Supplier — AvekGlob Company — offers to purchase zinc anodes in the required assortment of cross-section and length. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.