• +7 (495) 777-25-41
  • +38 (056) 785-39-23
    +38 (056) 785-39-23
  • +7 (3412) 26-03-80
  • +7(3422) 99-46-32
  • +7 (3812) 20-80-31
  • +7 (391) 205-17-79
  • +7 (8432) 07-01-39
  • +7 (383) 207-81-90
  • +49 (30) 217-888-05

Sheet, strip 42NKHTJU - Pernifer 42

Sheet, strip 42NKHTJU - Pernifer 42

General characteristics

42NKHTJU brand belongs to the group of precision alloys with high elastic properties, which are used for making sensitive elastic elements operating at t° to 100 °C. This group of alloys refers to high-alloyed alloys with rare physical characteristics: magnetic, elastic, thermal, electrical. These unique qualities are due to the precision of the chemical. composition, thoroughness manufacturing and processing, absence of impurities.

Chemical composition 42NKHTJU, in percent.

Al Ni Cr Ti S P C Si Mn Fe
0.5 — 1 41.5 — 43.5 5.3 — 5.9 2.4 — 3 up to 0.02 up to 0.02 to 0.05 0.5 — 0.8 0.5 — 0.8 44.91 — 49.3

Mechanical characteristics 42NKHTJU at 20 °C.

Products Eg. blower SB KCU Size y Heat treatment. sT
  - MPa kJ / m2 mm % - MPa
Nagartav. wire according to GOST 14118−85   1080          
Rod according to GOST 14119−85   980     25 Aging and annealing 635
Nagartav. tape according to GOST 14117−85   830          
GOST 10994−74   1180−1570          

Physical characteristics of the alloy grade 42NKHTJU.

kg/m3 W/(m·deg) Grad MPa 1/Deg J/(kg·deg) Ohm·m
r l T E 10 — 5 a 10 6 C R 10 9
    20 1.82 9.5    
Welding:
weldability limited — welding is possible in the process of heating up to temp. 100−120? C and further thermal treatment
konovalivka in order to obtain quality welded joints, it is necessary to perform additional operations: during welding heating up to temp. 200−300°C, heat treatment (annealing) after welding.
Welded without any restrictions — welding is carried out without further heat treatment and pre-heating.
Mechanical characteristics:
— Short-term tensile strength in [MPa] blower SB
— Yield strength (limit of proportionality) for the residual strain, [MPa] sT
— at break elongation in [ % ] d5
— narrowing of the relative in [ % ] y
— the viscosity of the shock, in [ kJ / m2] KCU
— Brinell hardness [MPa] HB
Physical characteristics of this brand of alloy:
— 1st kind of modulus of elasticity, [MPa] — E
— The heat capacity of the material (or the ratio of teploprovodna.), in [W/(m·deg)] -l
— The temperature required to obtain these properties, [Grad] — T
— linear coefficient. temp. extensions to [1/Deg] (temp. the interval 20o), -a
— electrical resistivity, [Ohm·m] -R
— The density of this material, [kg/m3] -r
— The specific heat of this material in [j/(kg·deg)] (temp. the interval 20 ° C) -C

Magnetic characteristics:

the coercive force (not more than) [A/m ] Hc
the magnetic permeability (not above) [ MH/m ] Umax
— specific losses (no higher) frequency 50 Hz, magnetic induction of 1.0 T [ W/kg ] P1.0/50
— T magnetic induction intensity of a magnetic field of not less than 100, in a magnetic field [ A/m ] B100

Buy at best price

The range of products from alloy 42NKHTJU, represented by LLC «AVEK global» can satisfy any consumer. This alloy belongs to the popular group of steel products due to its real value and variety of output options. Quality metal products is guaranteed absolute observance of all technological norms of production. In the absence of the base performance required of the product and if necessary other option products, we can produce custom sizes to order.