• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Incotherm® circle, wire, pipe

Incotherm® circle, wire, pipe

Company AvecGlob sells at a reasonable price from the manufacturer a variety of voluminous metal products — a circle, wire, pipe — made of an alloy of the brand Incotherm. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Composition and application

Incotherm ® TD is an alloy specially developed for the manufacture of thermocouples, which require high-temperature corrosion resistance and strength in combination with operational durability, in which the alloy performance can not deteriorate.

The composition of the considered alloy based on nickel and chromium also includes silicon, molybdenum and a number of rare-earth elements. Elements such as manganese and aluminum that can diffuse through the thermocouple and contaminate the thermocouple conductors leading to EMF drift are minimized at the lowest possible level, which gives excellent long-term performance. In addition, the alloy composition is chosen in such a way that the diffusion potential of the elements is minimal. The alloy has an exceptional resistance to static and cyclic oxidation at temperatures up to 1200 ° C, and briefly — at higher temperatures.

The Incotherm ® TD alloy has a high resistance to oxidation, and therefore can be used where surface contamination should be minimal, for example, in the production of glass and in the electronic processing of various products.

Chemical composition of the alloy:

Carbon, C Not more than 0.01%  
Chrome, Cr 22%  
Molybdenum, Mo 3%  
Nickel, Ni the basis  
Silicon, Si 1.4%  

Note. There are no ASTM and UNS standards for this alloy.

A circle, wire or pipe made from a special nickel-based alloy of the brand Incotherm ® TD, is offered by the company AVEK GLOB at economically advantageous prices. The supplier provides prompt delivery of products to any point. installed by the client.

Properties

Basic physical characteristics of the alloy:

Density, kg / m 3 — 8170;

Melting point, 0 С — 1380… 1400;

The coefficient of thermal expansion in the temperature range 20… 800 0 С, μm / deg — 16,1;

The coefficient of thermal conductivity in the temperature range 20… 100 0 С, W / mgrad — 16,2;

Specific heat capacity in the temperature range 20… 100 0 С, J / kggrad — 500.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 800;

Yield strength, MPA — 400;

Relative elongation at expansion,% — 50;

Hardness according to Brinell, HB, not more than — 276.

Technological feature of the alloy — methods of powder metallurgy are used to obtain the initial blanks.

AvekGlob offers to buy at affordable prices from manufacturers a circle, wire or pipe, which are made of nickel alloy Incotherm ® TD. The Supplier shall immediately send the products to any point agreed by the customer.