• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Pipe, sheet, wire VT3-1

Pipe, sheet, wire VT3-1

Company Avecglobal sells various profiles of rolled products — pipes, sheets or wires — at affordable prices from manufacturers, which is produced from titanium of VT3−1 grade. The supplier ensures the guaranteed delivery of products to any address specified by the consumer.

Composition and application

Titanium VT3−1 refers to heat-resistant two-phase alloys based on titanium. Due to the presence of chromium and molybdenum, the metal is characterized by increased thermal stability at high temperatures, and the presence of aluminum provides the alloy with sufficient ductility. At the request of the customer can also be made in the form of forgings. The operating temperatures of application are up to 400… 450 0 C. With thermal treatment and subsequent aging, the heat resistance of VT3−1 alloy can be increased to 530 ° C. The presence of aluminum reduces the density of the alloy, stabilizes and strengthens the α phase, while chromium and molybdenum provide increased the amount of more ductile β-phase for hot working. The VT3−1 alloy is popular with the high value of creep resistance at 300 ° C, and also the fatigue strength.

One of the difficulties with the β phase, which has a body-centered cubic crystal structure, is that, like the ferritic iron, it has a temperature of plastic brittle transition. The transition temperature tends to be above room temperature, and fracture cracking dominates at ambient temperature. Therefore it is developed and starts to be actively used

powder metallurgical variant of this alloy containing small concentrations of boron and carbon with about 25% greater strength and modulus of elasticity, but much less plasticity. The presence of chromium provides an alloy, heat resistance up to 510 ° C, so it is used in the manufacture of aircraft engines.

The chemical alloy of the alloy, which meets the technical requirements of GOST 19807−91, is presented in the table (numerical data — in percent, titanium — base):

Fe C Si Cr Mo N Al Zr O H Impurities
0.2 — 0.7 Not more than 0.1 0.15 — 0.4 0.8 — 2 2 — 3 Not more than 0.05 5.5 — 7 Not more than 0.5 Not more than 0.15 Not more than 0.015 Do0.3

Buy a pipe, sheet or wire, made of titanium alloy grade VT3−1. at economically favorable prices from the manufacturer offers the company AvekGlob. The supplier provides prompt delivery of rolled metal to any point set by the client.

Properties

Basic physical characteristics of metal:

Density, kg / m 3 — 4510;

Melting point, 0 С — 1640;

The coefficient of thermal expansion in the temperature range 20… 500 0 С, μm / deg — 11,4;

The coefficient of thermal conductivity in the temperature range 20… 500 0 С, W / Mgrad — 14,24;

Specific heat capacity in the temperature range 20… 500 0 С, J / kggrad — 670.

Basic mechanical characteristics of metal:

The limit of temporary resistance, MPa — 930;

Yield strength, MPa — 500;

Relative elongation at a stretching,% — 8… 10;

Relative narrowing of the cross-sectional area,% — 25… 30;

Impact strength, kJ / m 2 — 250… 300;

Hardness in Brinell, HB, not more than — 363.

Company Avecglob proposes to purchase at a reasonable price a pipe, sheet and wire, which are made of titanium grade VT3−1. The supplier makes immediate delivery of the products to any point agreed by the customer.