• +7 (495) 777-25-41
  • +38 (056) 785-39-23
    +38 (056) 785-39-23
  • +7 (3412) 26-03-80
  • +7(3422) 99-46-32
  • +7 (3812) 20-80-31
  • +7 (391) 205-17-79
  • +7 (8432) 07-01-39
  • +7 (383) 207-81-90
  • +49 (30) 217-888-05

Duralumin sheet

Duralumin sheet

Production

Duralumin sheet is produced in accordance with GOST 21631−76 from alloy D16 with chemical composition, normalized GOST 4784−74 or from VD1 (chemical composition of GOST 1131−76). The manufacturing accuracy is normal, the quality of the surface finish is standard. GOST 24231−80 normalizes the sampling for the control of the chemical composition.

The percentage composition of alloy VD 1

Fe Al Ni Mn Cu Zn Mg Si Ti Impurities
≤1 90−97.3 ≤0.2 0.3−0.8 2−5 ≤0,7 0.4−1.6 ≤1 ≤0.2 0.2

The percentage composition of alloy D 16

Fe Al Cr Mn Cu Zn Mg Si Ti + Zr Impurities
≤0.5 91−94.7 ≤0,1 0.3−0.9 3.8−4.9 ≤0.25 1.2−1.8 ≤0.5 ≤0.2 0,15

Marking

1. D16AM and VD1AM — annealed sheets with normal cladding.

2. D16 and VD1 — sheets not clad, without heat treatment.

3. D16AT and VD1AT — hardened and naturally aged with normal plating.

4. D16T — hardened and naturally aged sheets, not clad.

5. VD1AN and VD1AN2 — cold-worked and half-worked with normal cladding.

6. D16BT and D16UT — hardened and naturally aged with technological or thick plating.

7. ВД1НР — hard and refined sheet dural.

After quenching, the microstructure of the articles should not have traces of burnt. After the heat treatment they are tested.

Application

Sheets of brand D16 have high plasticity, corrosion resistance are perfectly processed by cutting, have satisfactory weldability, strength. They are used as fragments of hulls of river, sea vessels or aircraft. Often used for finishing interior interiors. The alloy VD1 also has high strength and is well welded by spot welding. Used for the lining of trucks, fuselage aircraft, the production of building structures.

Duralumin sheets of general purpose

No. NAME UNIT CUTTING, mm THICKNESS, mm PRICE
1. Dural sheet D16 kilogram 0.5 — 10

1200 x 4000

1200 x 3000

1500 x 3000

1500 x 4000

Negotiable
2. Duralumin sheet D16AM kilogram 0.5 — 10

1200 x 4000

1200 x 3000

1500 x 3000

1500 x 4000

Negotiable
3. Duralumin sheet D16T kilogram 0.5 — 10

1200 x 4000

1200 x 3000

1500 x 3000

1500 x 4000

Negotiable
4.

Dural sheets

D16UT,

D16AT

D16BT

kilogram 0.5 — 10

1200 x 4000

1200 x 3000

1500 x 3000

1500 x 4000

Negotiable
5.

Dural sheets

VD1AN2,

VD1,

VD1AM,

VD1AT

kilogram 0.5 — 8

1200 x 4000

1200 x 3000

1500 x 3000

1500 x 4000

Negotiable

Buy at a bargain price

LLC «Avek Global» sells non-ferrous metal products on the most favorable terms. We offer a rich choice of duralumin sheet of various parameters. Quality is guaranteed by strict observance of production technology. Deliveries are made very quickly, both wholesale and retail. With bulk orders, a flexible discount system operates. Storage, transportation, packaging, temporary corrosion protection is standardized (GOST 9.510−93). Our managers can advise you on all current issues. A wide range of products, as well as comprehensive information will help make the right choice.