• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Sheet, Inconel 601® tape - 2.4851 - alloy 601

Sheet, Inconel 601® tape - 2.4851 - alloy 601

Company Avecglobal sells at affordable prices from manufacturers of sheet products (sheet and tape), made of the alloy grade Inconel 601® (2.4851). the supplier is guaranteed timely delivery of products to any address specified by the consumer.

Composition and application

The Inconel 601® alloy (2.4851) belongs to the group of iron-nickel-chromium alloys, with additional aluminum alloying. Therefore, while maintaining high corrosion resistance at elevated temperatures and in corrosive environments, the alloy also retains a high mechanical strength. Inconel 601 is used in structural elements of industrial furnaces, thermocouple pipes, heat treatment equipment, baskets of carrying conveyors, in petrochemical equipment and in aircraft components.

The Inconel 601® alloy (2.4851) does not react to heat treatment, is characterized by good workability at normal and high temperatures. Inconel 601 demonstrates a high resistance to water corrosion, but is not recommended for use in environments that contain an increased percentage of sulfur, as it increases its fragility.

The chemical composition of the alloy, which meets the technical requirements of the standard UNS No. 06601, is presented in the table:

   
Nickel 58.0… 63.0
Copper Not more than 1.0
iron The basis
Manganese Not more than 1.0
Carbon Not more than 0.10
Silicon Not more than 0.5
Sulfur Not more than 0.015
Chromium 21.0… 25.0
Aluminum 1.0… 1.7

Note. The composition of the alloy allows up to 0.006% boron.

Company Avecglob proposes to buy at a cost-effective prices from the manufacturer sheet or tape, which are made of corrosion resistant alloy grade Inconel 601® (2.4851). The supplier provides a guaranteed shipment of products to any point set by the customer.

Properties

Basic physical characteristics of the alloy:

Density, kg / m 3 — 8110;

Melting point, 0С — 1360… 1410;

Coefficient of thermal expansion in the temperature range of 20… 100 0 С, μm / deg — 13.75;

Modulus of elasticity, GPa — 207;

Coefficient of thermal conductivity, W / megade — 11.2.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 600… 650;

Yield strength, MPa — 240… 300;

The coefficient of relative elongation at tension. % — thirty;

Hardness according to Brinell, HB, not more — 220.

Recommended limit temperatures for the use of products from this alloy in air environments are up to 1200 0 С.

Buy at affordable prices from the manufacturer sheet or tape, made of the alloy grade Inconel 601® (2.4851), offers the company AvekGlob. The supplier immediately delivers the products to any point agreed by the customer.