ВТ6Ч - titanium circle, rods, sheet
Do you want to buy a circle, rod, sheet of VT6ch alloy from the supplier — AvecGlob company? Here you will find the necessary information on this alloy
AvekGlob company sells various kinds of rolled metal (a circle, bar or sheet) made of titanium alloy of grade VT6ch at affordable prices from manufacturers. The supplier ensures the timely delivery of products to any address specified by the consumer.
Composition and application
The VT6ch grade alloy refers to two-phase (α + β) deformable titanium alloys, intended for subsequent plastic deformation by sheet and volume punching techniques.
The main way to change the structure and properties of a given alloy is its heat treatment. The alloy VT6ch is subject to annealing, aging, hardening, and thermo-mechanical treatment to a depth of 40… 45 mm.
In view of good weldability, the alloy is used for the production of complex stamped welded structures for aircraft parts and other aircraft. It is also used for the manufacture of chemical engineering products, the pharmaceutical and food industries, the operational temperatures of which do not exceed 400… 450 0 С.
In accordance with the technical requirements of OST 1.90013−81, the chemical composition of this alloy differs by more stringent tolerances on the percentage of some elements (see table, numerical data — in percent, titanium — base):
|Fe||C||Si||V||N (bound)||Al||O (related)||H (bound)||Impurities|
|Not more than 0.4||Not more than 0.1||Not more than 0.07||3.5 — 4.5||Not more than 0.05||5.5 — 6.75||0.07 — 0.12||Not more than 0.01||Up to 0.3|
A circle, bar or sheet made from a deformable titanium alloy of grade VT6ch is offered at economically advantageous prices, AvecGlob offers. The supplier provides prompt delivery of products to any point set by the customer.
Basic physical characteristics of the alloy:
Density, kg / m 3 — 4430;
Melting point, 0 С — 1020;
Coefficient of thermal expansion in the temperature range 20… 400 0 С, μm / deg — 9,8;
Coefficient of thermal conductivity in the temperature range 20… 400 0 С, W / mgrad — 12,56;
Specific heat capacity in the temperature range 20… 400 0 С, J / kggrad — 0,712;
Modulus of elasticity, GPa — 115.
Basic mechanical characteristics of the alloy:
The limit of temporary resistance, MPa — 900… 1200;
Yield strength, MPa — 100… 120;
Relative elongation at a stretching,% — 15… 20;
Relative narrowing of the cross-sectional area,% — 30… 45;
Impact strength, kJ / m 2 — 350… 400;
Hardness in Brinell, HB, not more than — 361.
Buy at affordable prices from the manufacturer a variety of rolled products — sheet, rod or circle, which is made of their deformable titanium alloy grade VT6h, offers the company AvecGlob. The supplier guarantees that the products are shipped immediately to any point agreed by the customer.