• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Sheet, ribbon nickel 201 - 2.4068

Sheet, ribbon nickel 201 - 2.4068

AvekGlob company sells sheet metal at a reasonable price from the manufacturer — sheet, tape — made of Nickel 201 alloy (2.4048). The supplier ensures guaranteed delivery of products to any point. specified by the consumer.

Composition and application

Nickel 201 is commercially pure forged material with good mechanical properties and excellent corrosion resistance, in particular from the action of hydroxides. The material contains not less than 99.6% pure nickel. The difference between the 2.4048 grade alloy from Nickel 201 is the reduced percentage of carbon, so it can be used at higher temperatures and use cold plastic deformation processes.

The considered alloys find application in the chemical industry, in the production of solutions of caustic soda, chlorine, hydrogen chloride, as well as in

Food Industry.

The materials in question provide high corrosion resistance in reducing and neutral media, as well as in an oxidizing atmosphere, provided that the oxidizing medium allows the formation of a passive oxide film. This oxide film provides excellent resistance of materials in a caustic medium.

Corrosion rates in sea and in ordinary water are very low, but increase with increasing temperature. In a mobile marine environment, the corrosion resistance of Nickel 201 alloy (2.4048) is reduced.

The operating temperature of the application of these alloys should not exceed 350… 400 0 С.

Buy at economical prices Nickel 201 (2.4048) in the range of sheet or tape offers the company AvecGlob. The supplier guarantees the prompt delivery of products to any address set by the client.

Properties

Distinctive features of the materials in question are:

High resistance in reducing environments;

Excellent resistance to alkalis;

High electrical conductivity;

Excellent corrosion resistance to distilled and natural water;

Resistance to solutions of neutral and alkaline salts and halogens;

Good thermal, electrical and magnetostrictive properties

Alloys also have some resistance to hydrochloric acid and sulfuric acid at moderate temperatures and concentrations.

Chemical composition (numerical data — in percent):

Ni Fe Cu C Mn S Si
Not less than 99.0 Not more than 0.40 Not more than 0.25 Not more than 0,02 Not more than 0.35 Not more than 0,01 Not more than 0.35

Physico-mechanical characteristics:

  • Melting point, 0С — 1445;
  • Density, kg / m 3 — 8900;
  • The limit of temporary resistance, MPa — 600… 800;
  • Yield strength, MPa — 200… 300;
  • Relative elongation at tension,% — 35… 55;
  • Hardness according to Rockwell (scale B), not more than — 75.

To buy at affordable prices from the manufacturer a sheet, a tape, which are produced from chemically pure nickel brand Nikel 201 (2.4048), offers the company AvekGlob. The supplier makes immediate delivery of the products to any point agreed by the customer.