Supplier — AvekGlob Company — offers tin sheets at a reasonable price from the manufacturer in a significant range of thickness and width. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Tin is a metal that has strong anticorrosive properties in water — fresh and salty. At the same time, the metal loses these properties when used in acid media. In addition, tin is susceptible to creep deformation at room temperature. A tin sheet produced domestically is produced in accordance with the requirements of TU 48−21−206−87. It is produced by grades O1, O2, O3 and O4, which differ in the degree of refining. High ductility of the parent metal assumes a variety of thicknesses of the final profiles
Urgency of application
The most popular applications of tin sheet are the subsequent production of food tin foil, steel sealed cans, gas sensors, parts of superconducting magnets. Tin sheets are used for packing and storing some ceramic products.
It is shown in the table, which corresponds to GOST 860−85 (numeric data — in percent):
|Make||Category||Sn,||Impurities, no more than|
|tin||quality||not less than||As||Fe||Cu||Pb||Bi||Sb||S||Zn||Al||Cd||Ag||Total|
|VHC-OPEN COMPANY *||Higher||99.999||10 -4||10 -4||10 -5||10 -5||5.10 -6||5 * 10 -5||-||3 * 10 -5||3 * 10 — 4||3 * 10 -5||5 * 10 -6||10 -3|
* — in the tin of VHC-LLC there are also admixtures of gold, cobalt, nickel, indium in the amount of 1.10 ' 5 % of each element.
** — at the request of the consumer, the content of bismuth in tin O1 should not be more than 0.01%.
*** — in accordance with the consumer’s agreement with the manufacturer in the tin of grades O2 and 02 of the first category, the lead content is allowed up to 3%.
Physical and mechanical properties
- density, kg / m 3 — 5765;
- melting point, 0 С — 232;
- coefficient of thermal expansion at room temperature, μm / deg — 5,4;
- modulus of elasticity, GPa — 41,6;
- coefficient of thermal conductivity at room temperature, W / mgrad — 63.2;
- hardness in Brinell, HB — 2… 3;
- yield strength, MPa — 220.
Assortment and application features
Tin sheet, which is produced in accordance with GOST 860−85 and TU 48−21−206−87, is produced in a wide range of thickness and width. The joining of sheet parts from tin is made mainly by soldering.
Supplier — AvekGlob Company — offers to purchase sheets of tin in the required assortment of cross sections and length. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.