• +7 (495) 777-25-41
  • +38 (056) 785-39-23
    +38 (056) 785-39-23
  • +7 (3412) 26-03-80
  • +7(3422) 99-46-32
  • +7 (3812) 20-80-31
  • +7 (391) 205-17-79
  • +7 (8432) 07-01-39
  • +7 (383) 207-81-90
  • +49 (30) 217-888-05

Sheet, tape 2.4608 - alloy 333®

Sheet, tape 2.4608 - alloy 333®

AvekGlob Company sells sheet metal (sheet, tape) at an affordable price, which is made of Alloy 333 (2.4608) alloy. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Composition and application

Alloy 333 (2.4608) alloy belongs to the group of alloys based on nickel, chromium and iron, with additional doping with tungsten, molybdenum, cobalt and silicon. The alloy is highly resistant against oxidation, carburization, including, and in acidic environments, and also has increased crack resistance in conditions of constant temperature changes. These properties are stored up to temperatures of 1150… 1200 0 С.

The alloy in question is intended to produce forged blanks and semi-finished products. It is usually provided to the consumer in the annealing state (O). From this alloy, pipe supports are produced in oil refineries and coal-fired boilers,

couplings for heat treatment, retorts, fan shafts, couplings for the production of carbon fiber, seals of sulfuric acid plants, scrubbers for cement kilns. It is manufactured in accordance with the technical standards and requirements of the standard UNS N06333 and has the following chemical composition:

Chemical element Ni Cr Mo Co W Si Mn C Fe
Minimum percentage 44.00 24.00 2.50 2.50 2.50 0.75 - -  
Maximum percentage 47.00 27.00 4.00 4.00 4.00 1.50 2.00 0.08 Rest

Buy a cost-effective price sheet or tape of corrosion and temperature-resistant iron-chromium-nickel alloy brand Alloy 333 (2.4608) offers the company AvekGlob. The supplier provides a guaranteed shipment of products to any point. installed by the client.

Properties

Basic physical characteristics of the alloy:

Density, kg / m 3 — 8500;

Melting point, 0 С — 1460;

Coefficient of thermal expansion, μm / degree — 13;

Specific heat capacity, kJ / kggrad — 450;

Modulus of elasticity, GPa — 210.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 630;

Yield strength, MPa — 270;

Relative elongation at tension,% — 34;

Hardness by Rockwell (scale B), no more than 85.

Technological features of the alloy — it differs excellent workability and weldability.

Company Avecglob proposes to purchase at a reasonable price of the manufacturer sheet or tape, which are made of a high-temperature alloy based on iron, chromium and nickel brand Alloy 333 (2.4608). The supplier immediately delivers the products to any point agreed by the customer.