• +7 (495) 777-25-41
  • +38 (056) 785-39-23
    +38 (056) 785-39-23
  • +7 (3412) 26-03-80
  • +7(3422) 99-46-32
  • +7 (3812) 20-80-31
  • +7 (391) 205-17-79
  • +7 (8432) 07-01-39
  • +7 (383) 207-81-90
  • +49 (30) 217-888-05

Circle, wire, pipe CuNi10Fe1Mn - MNZhMts10-1-1

Circle, wire, pipe CuNi10Fe1Mn - MNZhMts10-1-1

Do you want to buy a circle, wire, a pipe from the alloy MNZhMts10−1-1 (CuNi10Fe1Mn) from the supplier — the company AvecGlob? Here you will find the necessary information on these alloys

Buy at affordable prices from the manufacturer a variety of volume rolling (circle, wire and pipe) in a wide range of profiles, made of copper-nickel alloy MNZhMts10−1-1 (the nearest foreign analogues — alloys CuNi10Fe1Mn, 2.0872 and C70600) is offered by AvekGlob. The supplier carries out timely delivery of products to any address specified by the consumer.

Composition and application

Copper-nickel non-magnetic alloy MNZhMts10−1-1 (CuNi10Fe1Mn, 2.0872, C70600) belongs to the category of nickel metals. It has excellent resistance to corrosion, erosion and cavitation, including in sea water. The alloy has good welding properties. Basically, the material is used for the manufacture of valves, pump components, fittings, flanges and other marine applications. Among other examples of effective use — body parts of heating devices, heat exchangers and condensers. Recently, from the alloy MNZhMts10−1-1 (CuNi10Fe1Mn, 2.0872, C70600) begin to produce and details of various electronic devices.

The alloy is produced by the technology of cold and hot rolling, and also in the form of forgings. Forgings made from this alloy are characterized by increased resistance to stress corrosion cracking.

The chemical composition of the alloy MNZhMts10−1-1, which is regulated by the technical requirements of GOST 492−2006 (for the analogs produced abroad, UNS C70600 and DIN EN 17664 are valid) is presented in the table (numerical data — in percent, copper — the rest):


Ni + Co
Fe C Mn S Pb Zn Impurities
9 — 11 12 Not more than 0.03 0.3 — 1 Not more than 0.03 Not more than 0.03 Not more than 0.3 only 0.5 (mostly tin and lead)

Note. The total amount of cobalt should not exceed 0.1%.

The company Avecglobal sells, at economically advantageous prices, volume rolling — a pipe, wire or a circle, which are produced from copper-nickel alloy MNZhMts10−1-1 (or its foreign analogues — CuNi10Fe1Mn, 2.0872, C70600). The supplier ensures guaranteed shipment of products to any point set by the customer.

Properties

Basic physical properties of alloys:

Density, kg / m 3 — 8900;

Melting point, 0 С — 1090… 1125;

Coefficient of thermal conductivity, W / megade — 50;

The coefficient of thermal expansion in the temperature range 20… 200 0 С, μm / deg — 17.

Basic mechanical properties of alloys:

The limit of temporary resistance, MPa — 290… 350;

Yield strength, MPa — 190… 220;

Relative elongation at a stretching,% — 30… 22;

Hardness according to Brinell, HB, no more than 85.

Technological features: alloys are well welded under the flux layer, provided that Monel® 67 is used as the filler, and Monel® 187 for welding electrodes.

To buy at affordable prices from the manufacturer a wire, a pipe or a circle of various cross-sections and sizes that are made of copper-nickel alloy MNZhMts10−1-1 (or the nearest foreign analogues — CuNi10Fe1Mn, 2.0872, C70600), AvecGlob offers. The supplier carries out the immediate delivery of rolled metal to any point agreed by the customer.