• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Wire corrosion-resistant

Wire corrosion-resistant

Supplier — AvekGlob company — offers at a reasonable price from the manufacturer a wire made of corrosion-resistant steels. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Technical specifications

Corrosion-resistant wires are made of stainless steels that contain an increased percentage of chromium and nickel in their composition. When used in elevated temperatures, titanium, aluminum and molybdenum are added to the steel composition.

Steel of such composition successfully resist extreme environmental influences on pipes: the presence of acidic impurities in the air, as well as water and other factors. Corrosion-resistant wire is characterized by structural stability and mechanical strength, as well as increased toughness.

Urgency of application

Wire made of corrosion-resistant steels is used to make corrosion-resistant fasteners and normalized products that work in corrosive environments. Products are used in the petrochemical, gas, chemical industry, in the production of food acids, as well as in pharmaceuticals.

Wire made of corrosion-resistant steels should withstand the following types of corrosion: contact, galvanic, intergranular, cracking and point corrosion.

Chemical composition

Distinctive features of steels from which corrosion-resistant wire is produced:

A small percentage of carbon (provides good weldability);

At least 8… 10% chromium;

At least 1.5… 2% nickel;

The lower content of silicon and manganese (up to 1… 1.5%);

Minimization of metallurgical impurities — phosphorus and sulfur (up to 0.040%).

Physical and mechanical properties

Determined by technological designation of products. Characteristic features — sufficiently high strength, increased fracture toughness, average hardness values, high density, minimal propensity to temperature expansion.

Technological features of processing and assortment

Wire from corrosion-resistant steels is available in a wide range of grades and diameters. It is produced by cold and hot drawing technology.

Almost all grades of corrosion-resistant steels have limitations on weldability, after welding, finished products must be annealed.

Supplier — AvekGlob Company — offers to purchase corrosion-resistant wire of any diameter at a price formed on the basis of European and world standards of production. Buy these products can be wholesale and retail. For regular customers, there is a flexible system of discounts.