Circle, rod, grade 5 titanium 3.7165 Titanium 6Al-4V
AvekGlO sells a rod or a circle at a reasonable price from the manufacturer, which is made of titanium alloy Grade 5 of Titanium 6Al-4V brand (other name 3.7165). The Supplier organizes the timely dispatch of hire to any address specified by the customer.
Composition and application
The titanium alloy Grade 5 of the brand Titanium 6Al-4V (another name 3.7165) was developed primarily for primary plastic deformation to produce forgings of various configurations and sizes. 3.7165 is the digital designation of this alloy according to the European standard DIN EN, R56400 is the UNS standard number.
Ti-6Al-4V among deformable titanium grades is distinguished by a rather low density. In addition, it has a moderately high heat capacity and a sufficiently high melting point.
The alloy Ti-6Al-4V (3.7165) is the most widely used titanium alloy of class α + β. Due to its high casting characteristics, the material is used to produce sports equipment. Forged material is used in aerospace, medical and other applications where good strength is required in combination with sufficient anti-corrosive properties. Of the alloy under consideration, products such as blades, discs, rings, parts of gliders, fasteners, components of sea vessels are produced.
Titanium alloy grade 5 grades Ti-6Al-4V (3.7165) is highly biocompatible, especially when direct contact with tissue or bone is required. However, low shear resistance eliminates the use of this alloy for jointing with screws or plates.
The alloy is characterized by increased sliding friction, and tends to be captured by sliding contact with itself and other metals. Surface treatment, for example, nitriding or blasting, improves wear resistance.
The chemical composition of the alloy Grade 5 Ti-6Al-4V (3.7165) is given in the table:
|Content,%||The basis||Not more than 0.08||Not more than 0.03||Not more than 0.05||5.5−6.75||Not more than 0.20||3.5−4.5||Not more than 0.015||Not more than 0.005||Up to 0.40|
Buy at economical prices from the manufacturer of a bar or a circle made of titanium alloy Grade 5 brand 6Al-4V (3.7165) offers the company AvekGlob. The supplier provides guaranteed delivery of rolled metal to any point set by the customer.
Basic physical characteristics of the alloy:
Density, kg / m 3 — 4430;
Melting point, 0 С — 1605… 1660;
The coefficient of thermal expansion in the temperature range 20… 315 0 С, μm / deg — 9,2;
Coefficient of thermal conductivity, W / megade — 6.7;
Specific heat capacity, J / kggrad — - 526.7;
Modulus of elasticity, GPa — 113.8.
Basic mechanical characteristics of the alloy:
The limit of temporary resistance, MPa — 880… 950;
Yield strength, MPa — 390… 400;
Relative elongation at tension,% — 14;
Relative narrowing of the cross-sectional area,% — 36;
Hardness according to Brinell, HB, not more — 334.
Company Avecglob proposes to purchase at affordable prices from the manufacturer a bulk metal (bar or circle), which is made of titanium alloy Grade 5 brand 6Al-4V (3.7165). The Supplier shall immediately send the products to any point agreed by the customer.