Cutting foam on insoles
Are you interested in cutting foam on insoles? Supplier Avlob offers to buy a nichrome thread for cutting foam on the insole at a bargain price. The supplier guarantees the timely delivery of the muffle furnace to any specified address. Regular customers can take advantage of discount discounts. The price is the best in this segment of rental.
Technical specifications
Nichrome thread for cutting has the following physical properties:
- Specific resistance 1,0−1,3 • 10 6 Ohm • m; -
- operating temperature of nichrome to 1100 ° C, melting temperature from 1100 to 1300 ° C;
- density of the brand Х20Н80 — 8400 kg / m3;
- density of the brand Х15Н60 — 8200 kg / m3;
- the specific heat of nichrome is 0.44−0.46 kJ / (kg • K);
- tensile strength — 0,65−0,70 GPa;
- high heat resistance of nichrome up to 1270 ° C;
Percent composition
The material from which the yarn is produced is an alloy of nickel and chromium, plus alloying elements.
| Alloy | S | P | FROM | Ti | Al | Zr | Fe | Mn | Si | Cr | Ni |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X15N60 | ≤ 0.02 | ≤0.03 | ≤ 0.5 | ≤0.3 | ≤0.2 | --- | 18−29.2 | ≤1,5 | 1 — 1.5 | 15 — 18 | 55 — 61 |
| X20H80-H | ≤ 0.015 | ≤ 0.02 | ≤ 0.06 | ≤ 0.2 | ≤ 0.2 | 0.2 — 0.5 | ≤ .1 | ≤ 0.6 | 1 — 1.5 | 20 — 23 | 73 — 78.8 |
Х15Н60, Х20Н80 combine heat resistance with good processability. Such alloys are more heat resistant than fencer, but unlike the latter, they contain expensive and scarce nickel. Fechral is much cheaper, it differs high heat resistance, but it is more fragile, and, therefore, less technological (can not be rolled into a very thin tape, wire).
Delivery, price
Buy nichrome wire at an affordable price from the supplier Avlob today. The price is formed on the basis of European production standards. The supplier Avlob offers to buy nichrome wire for cutting foam on the insole at the optimal price in bulk or at retail. We invite you to partner cooperation.